← All projects

IoT · 2026

AlcoHalt

An IoT safety system that checks for alcohol before a vehicle will start. An ESP32 reads an MQ-3 alcohol sensor, shows the status on a small LCD and controls a relay on the ignition. If the reading is over the limit, the ignition stays locked for 30 seconds and an ESP32-CAM takes a photo of whoever tried. Every attempt shows up on a live web dashboard with the photo, the reading and the verdict.

  • Locks the ignition through a relay when alcohol is detected
  • An ESP32-CAM photographs every blocked attempt
  • A live dashboard logs each event with its photo and reading

ESP32, ESP32-CAM, Arduino C++, Python, Flask, SQLite

The AlcoHalt dashboard after 31 attempts, 13 safe and 18 blocked, with the latest camera photo marked Blocked, alcohol detectedOne blocked attempt: the camera photo, the reading against the threshold, the verdict Ignition Blocked and the system report on the 30-second lockThe wiring diagram: ESP32, MQ-3 alcohol sensor, LCD, LEDs and the relay to the motor
NextYatra Sahayak

Nigam Mehta

Computer engineering student

--:-- IST · open to work

mehtanigam204@gmail.com

To: Nigam